Datalogic GM4500

Datalogic Gryphon GM4500 Wireless Barcode Scanner Kit

用户手册

介绍

This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your Datalogic Gryphon GM4500 Wireless Barcode Scanner Kit. Please read this manual thoroughly before using the device to ensure proper functionality and to prevent damage.

包装内容

确认包裹内所有物品齐全：

  • Datalogic Gryphon GM4500 Wireless Barcode Scanner (GM4500-BK-433K1)
  • Wireless Charging Base (WLC4090-BK-433)
  • USB Cable (90A052258)
  • 锂离子电池（预装或单独出售）

产品结束view

The Datalogic Gryphon GM4500 is a high-performance wireless barcode scanner designed for various applications. Below is an illustration of the scanner's main components.

Datalogic Gryphon GM4500 Wireless Barcode Scanner

Image: Datalogic Gryphon GM4500 Wireless Barcode Scanner. This image shows the black handheld scanner with its scan window emitting light, and a blue trigger button on the handle. The base of the handle features a wireless charging indicator.

关键组件：

  • 扫描窗口： 条形码读取区域。
  • 触发按钮： 启动扫描光束。
  • 指示灯： Provide feedback on status (e.g., battery, scan success).
  • Wireless Charging Contacts: Located at the base of the scanner for charging with the WLC4090-BK-433 base.
  • 无线充电底座： Connects to the host system via USB and charges the scanner.

设置

  1. 为扫描仪充电：
    • Connect the USB cable to the Wireless Charging Base (WLC4090-BK-433) and then to a powered USB port on your computer or a USB power adapter.
    • Place the Gryphon GM4500 scanner onto the charging base. Ensure the charging contacts align.
    • The scanner's indicator light will show charging status. Allow sufficient time for a full charge before first use.
  2. Connect the Base to Host System:

    The charging base also acts as the communication interface. Once connected via USB, your operating system should automatically detect and install the necessary drivers. If not, refer to Datalogic's official web驱动程序下载站点。

  3. Pairing the Scanner with the Base:

    The scanner and base are typically pre-paired. If pairing is lost or you are setting up a new scanner/base combination:

    • Ensure the base is powered and connected to the host system.
    • Refer to the Datalogic Gryphon GM4500 Quick Reference Guide (usually included or available online) for specific pairing barcode sequences. Scan the designated pairing barcode with the scanner.
    • A successful pairing will be indicated by an audible beep and/or a specific LED pattern on both the scanner and the base.

操作说明

  1. 扫描条形码：
    • Point the scan window of the Gryphon GM4500 at the barcode you wish to read.
    • Press and hold the trigger button. A red aiming beam or illumination pattern will appear.
    • 调整扫描器位置，使瞄准光束覆盖整个条形码。
    • Once the barcode is successfully read, the scanner will emit a short beep and/or an indicator light will flash green. The data will be transmitted to your host system.
  2. Reading Difficult Barcodes:

    For poorly printed, damaged, or reflective barcodes, try adjusting the distance and angle of the scanner. Sometimes, scanning from a slight angle can improve readability.

  3. 电池电量指示：

    The scanner typically has an LED indicator that changes color or flashes to indicate the battery charge level. Refer to the full product manual for specific LED patterns and their meanings.

维护

  • 清洁扫描仪：

    Regularly clean the scan window and the exterior of the scanner. Use a soft, lint-free cloth lightly dampened with water or a mild, non-abrasive cleaning solution. Do not use harsh chemicals or abrasive materials, as these can damage the device.

  • 电池保养：

    To prolong battery life, avoid exposing the scanner to extreme temperatures. Charge the battery regularly and avoid completely draining it whenever possible. If the scanner will be stored for an extended period, ensure it has a partial charge (around 50%) and store it in a cool, dry place.

  • 贮存：

    When not in use, store the scanner on its charging base or in a safe location to prevent accidental drops or damage.

故障排除

问题可能的原因解决方案
扫描仪无法开机或响应。电池电量低或耗尽。Place the scanner on the charging base and allow it to charge for at least 30 minutes.
扫描器无法读取条形码。
  • 条形码损坏或印刷质量差。
  • Scanner is not paired with the base.
  • 启用了错误的符号系统。
  • Scan window is dirty.
  • 尝试扫描另一个已知有效的条形码。
  • Re-pair the scanner with the base (refer to Setup section).
  • Consult the full product manual for enabling/disabling barcode symbologies.
  • Clean the scan window.
Data is not transmitted to the host system.
  • Base is not properly connected to the host.
  • Scanner is out of range or not paired.
  • Host system driver issue.
  • Verify USB cable connection to the base and host.
  • Ensure scanner is within range of the base and properly paired.
  • Restart the host system. Check Datalogic's web提供最新驱动程序的网站。

规格

特征细节
型号GM4500-BK-433K1
连接技术Wireless (433 MHz), USB Cable (for base)
电源电池供电（包含 1 节锂离子电池）
商品重量8.6盎司
产品尺寸5.12 x 5.12 x 7.87 英寸
制造商数据逻辑
最先可用日期5 年 2019 月 XNUMX 日

保修和支持

有关详细的保修信息，请参阅产品随附的保修卡或访问 Datalogic 官方网站。 website. For technical support, driver downloads, or further assistance, please contact Datalogic customer service directly.

制造商： 数据逻辑

Web地点： www.datalogic.com