介绍
This manual provides instructions for the proper installation, use, and maintenance of Balimo Cat Fountain Filters. These filters are designed to ensure your pet has access to clean, fresh drinking water by removing impurities and improving water quality. Regular replacement of the filter is essential for optimal performance and your pet's health.
Image: A set of six Balimo cat fountain filters, designed to fit Balimo pet water fountains. The filters are white and semi-circular, with distinct sections for filtration media. A small, clear Balimo pet water fountain is also visible at the bottom of the image.
包装内容
每个软件包包含：
- 6 x Balimo Cat Fountain Filters
Image: A white box labeled "FILTER UNIT" with a graphic of a filter, indicating "6PCS". Next to the box is a stack of six Balimo cat fountain filters and a Balimo pet water fountain, confirming the contents of the package.
设置和安装
- 冲洗过滤器： Before installation, thoroughly rinse the new filter under running water for 10-30 seconds. This helps remove any loose carbon dust and prepares the filter for use.
- 安装过滤器： Ensure the filter is completely wet. Gently place the filter into the designated filter slot within your Balimo pet water dispenser. Refer to your specific Balimo fountain's manual for the exact filter placement.
- 填满喷泉： Fill the water fountain with fresh water to the recommended level.
Image: A hand holding a Balimo cat fountain filter under a running kitchen faucet, illustrating the essential step of rinsing the filter before its first use to ensure optimal performance.
操作说明
Once the filter is installed and the fountain is filled, the Balimo Cat Fountain will begin to circulate and filter the water, providing a continuous supply of clean water for your pet. The filter works to remove impurities, odors, and soften the water, contributing to your pet's hydration and health.
Image: A cat drinking water from a Balimo pet water fountain, demonstrating the product in use. Two Balimo filters are placed next to the fountain, highlighting their role in maintaining water quality.
维护
Regular filter replacement is crucial for maintaining water quality and the longevity of your pet fountain.
- 更换时间表： It is recommended to replace the filter every 2 to 3 weeks. While the water dispenser itself can last for an extended period, consistent filter replacement ensures a safer and healthier drinking environment for your pet.
- 清洁喷泉： In addition to filter replacement, regularly clean the entire water fountain according to its specific instruction manual to prevent buildup and maintain hygiene.
故障排除
If you encounter issues with your Balimo Cat Fountain related to water quality or flow, consider the following:
- 水流量减少： If water flow decreases, the filter may be clogged. Replace the filter with a new one. Ensure the pump is also clean and free of debris.
- Poor Water Quality/Odor: If the water appears cloudy or develops an odor, the filter's effectiveness may be diminished. Replace the filter immediately. Ensure the fountain itself is thoroughly cleaned.
- 过滤器不匹配： Verify that you are using the correct Balimo filter model for your specific Balimo 3L Water Feeder.
规格
- 品牌： 巴利莫
- 产品类型： Cat Fountain Filter Replacement
- 兼容性： Specifically designed for Balimo 3L Water Feeders (Models MEA-1, MEA-2).
- 方面： 约 110 毫米（长）x 70 毫米（宽）。
- 过滤层： Activated carbon, ion-exchange resin, and filter cotton for multi-stage 过滤。
Image: A diagram illustrating the dimensions of the Balimo filter, measuring 110mm in length and 70mm in width. The image also explicitly states that the filter is compatible only with the Balimo 3L Water Feeder, showing a checkmark next to the correct fountain type and an 'X' next to incompatible fountain types.
Image: A cross-section diagram of the Balimo filter, detailing its multi-layer filtration system. It shows how the filter removes impurities, bad taste, and odor, softens water, and adsorbs impurities through various layers, including activated carbon and resin.