1. 简介
This manual provides detailed instructions for the FULODE X1-16C 16-Channel Audio Mixer. Please read this manual thoroughly before operating the device to ensure proper usage and to maximize its performance and longevity. This professional audio console is designed for various applications including studio recording, live performances, DJ events, and karaoke.
2. 安全信息
To prevent electric shock, fire, or damage to the device, please observe the following safety precautions:
- 请勿打开设备 casing. 所有维修工作均应交由合格人员进行。
- 确保电源电压tage 符合设备上指定的要求。
- Keep the device away from water, moisture, and excessive heat.
- Do not operate the device if the power cord is damaged or frayed.
- 清洁或进行维护前，务必先断开电源。
- 仅使用制造商指定的附件/配件。
3. 包装内容
确认包裹内所有物品齐全：
- FULODE X1-16C 16-Channel Audio Mixer
- Power Adapter (AC 90-240V, 50-60Hz)
- 用户手册
4. 产品结束view：控制和连接
The FULODE X1-16C mixer features a comprehensive layout for intuitive control over your audio. Familiarize yourself with the various inputs, outputs, and control elements.
4.1 前面板控制
- Composite Interface: Combination XLR/TRS input for microphones and line-level signals.
- 幻影开关： 激活电容式麦克风的 +48V 幻象电源。
- 增益调整： Controls the input sensitivity of each channel.
- Treble/Midrange/Bass Adjustment (3-Band EQ): 每个通道的高、中、低频均衡控制。
- AUX调节： Controls the auxiliary send level for external effects or monitor mixes.
- Adjustment of Effect: Controls the amount of internal DSP effect applied to the channel.
- Pan Balance: 调整声道信号的立体声位置。
- Channel Mute Switch: Mutes or unmutes the individual channel.
- Channel Volume Pusher: Fader to control the output level of each channel.
- Reverberation Effect Selection: Knob to select from 99 built-in DSP effects.
- USB/MP3播放： Section for USB drive and Bluetooth audio input, with transport controls and digital display.
- 液位指示灯： 输出电平的可视化显示。
- Main Channel Seven Segment Balance: Graphic equalizer for the main stereo output.
- 显示器音量调节： 控制耳机输出的音量。
- Effect Main Volume Adjustment: Controls the overall level of the selected DSP effect.
- Left/Right Main Volume Adjustment: Faders for the main stereo output.
- Earphone Monitoring Interface: 1/4" jack for headphone monitoring.
- MP3 Main Volume Adjustment: Controls the output level of the USB/MP3/Bluetooth section.
4.2 后面板连接
- 开关;电源开关： 打开或关闭混音器。
- 电源接口： 连接至所提供的电源适配器。
5. 设置
Follow these steps for initial setup of your FULODE X1-16C Audio Mixer.
5.1 电源连接
- 确保搅拌机的电源开关处于关闭位置。
- Connect the power adapter to the Power Interface on the rear panel of the mixer.
- Plug the power adapter into a suitable AC power outlet (110V).
- Turn the mixer's power switch to the ON position. The digital display should illuminate.
5.2 连接麦克风和乐器
- For microphones or line-level instruments, connect them to the Composite Interface (XLR or 1/4" TRS) on the desired channel.
- 如果使用电容式麦克风，请按下 幻象开关 (+48V) for that specific channel. An indicator light will confirm activation.
- 调整 增益调整 knob for each input channel to achieve an optimal signal level without clipping.
5.3 连接输出设备
- 连接您的主扬声器或 amp改善者 Main Output Interface (XLR or 1/4" TRS) on the top right of the mixer.
- For monitoring, connect headphones to the Earphone Monitoring Interface.
6.操作说明
6.1 通道控制
- 获得： Adjust the input gain for each channel to prevent clipping (indicated by the PEAK LED) and ensure a strong signal.
- 三段均衡： Use the HI, MID, and LOW knobs to shape the tone of each input.
- 辅助： Control the amount of signal sent to the auxiliary output for external effects or monitor mixes.
- 外汇： Adjust the level of the internal DSP effect applied to the channel.
- 潘： Position the channel's signal in the stereo field (left to right).
- 沉默的： Press the MUTE button to instantly silence a channel.
- 通道推子： Use the fader to control the overall volume of the channel in the main mix.
6.2 种 DSP 效果
The mixer includes 99 built-in 24-bit DSP effects for enhancing your sound.
- 使用 Reverberation Effect Selection knob to browse through the 99 available effects (e.g., Warm Room, Bright Room, Hall, Plate, Chorus, Delay). The digital display will show the selected effect number.
- 按下旋钮确认您的选择。
- 调整 Effect Main Volume Adjustment to control the overall wet/dry mix of the effects.
- Use the individual channel's FX knob to send more or less of that channel's signal to the effects processor.
6.3 USB/MP3/Bluetooth Playback
The mixer supports audio playback from USB drives and Bluetooth-enabled devices.
- USB播放： 插入包含 MP3 的 USB 驱动器 files into the USB port. Use the transport controls (Play/Pause, Skip) and the MP3 Main Volume Adjustment 控制播放。
- 蓝牙连接： Press the MODE button on the USB/MP3 section until 'BT' appears on the digital display. On your smart device, search for 'MIX-BT' (or similar) and pair. Once connected, you can stream audio wirelessly to the mixer.
6.4 主要输出和监控
- 使用 Left/Right Main Volume Adjustment faders to control the overall output level of the mix.
- 这 液位指示灯 provides visual feedback on the main output levels. Adjust faders to keep levels within the optimal range (avoiding red/clipping).
- 这 Main Channel Seven Segment Balance (graphic EQ) allows for fine-tuning the overall frequency response of your main mix.
- 调整 Monitor Volume Adjustment for comfortable listening through headphones.
6.5 官方产品视频演示
Watch this video for a visual demonstration of the FULODE mixer's features and operation. Note: The video features a MIX-12 model, which shares many similar functionalities with the X1-16C.
7. 维护
妥善保养可确保搅拌机的使用寿命长久且性能最佳。
- 打扫： Use a soft, dry cloth to wipe the surface of the mixer. Do not use liquid cleaners or solvents, as they may damage the finish or internal components.
- 贮存： Store the mixer in a cool, dry place away from direct sunlight and extreme temperatures. If storing for extended periods, cover the unit to protect it from dust.
- 通风： 确保搅拌机周围通风良好，防止过热。切勿堵塞通风口。
8。 故障排除
If you encounter issues with your FULODE X1-16C mixer, refer to the following common problems and solutions:
| 问题 | 可能的原因 | 解决方案 |
|---|---|---|
| 无电源 | Power cable not connected; Power switch off; Faulty power adapter/outlet | Check power cable connection; Ensure power switch is ON; Try a different power outlet or adapter. |
| 频道无声音 | Channel muted; Gain too low; Cable issue; Phantom power not activated (for condenser mics) | Check MUTE button; Increase Gain; Verify cable connections; Activate +48V phantom power if needed. |
| 主输出没有声音 | Main faders down; Output cables disconnected; Amp功放/扬声器已关闭 | Raise Main Volume faders; Check output cable connections; Ensure amplifier/speakers are powered on and connected. |
| 蓝牙未连接 | Mixer not in Bluetooth mode; Device too far; Already connected to another device | Press MODE until 'BT' appears; Ensure device is within 33 ft; Disconnect from other devices. |
| 声音失真 | Gain too high (clipping); EQ settings extreme; Faulty cable/microphone | Reduce Gain (ensure PEAK LED is not constantly lit); Adjust EQ to neutral or moderate settings; Test with different cables/microphones. |
9. 规格
Technical specifications for the FULODE X1-16C 16-Channel Audio Mixer:
- 模型： X1-16C
- 通道数： 16
- DSP效果： 99 built-in 24-bit effects
- 均衡： 3-band EQ per channel, 7-band graphic EQ on main output
- 幻像电源： +48V（每个通道可切换）
- 连接性： USB (playback/recording), Bluetooth, XLR, 1/4" TRS
- 电源： 有线电动
- 卷tage: 110 伏 (AC)
- 产品尺寸： 15.55英寸深 x 18.9英寸宽 x 4.13英寸高（39.5厘米深 x 48厘米宽 x 10.5厘米高）
- 商品重量： 18.16 磅（8.24 千克）
10. 保修和支持
For warranty information and technical support, please refer to the documentation included with your purchase or contact FULODE customer service through their official channels. Keep your proof of purchase for any warranty claims.