Welland RS2360B 智能跳绳
产品信息
- 产品名称： 智能跳绳
- 产品尺寸： 27x180mm
- 绳子尺寸： 3000mm
- 重量： 0.20 kg
- 显示屏尺寸： 28 x 16 mm
- 电池类型： 2 个 1.5V AAA
产品使用说明
- Long press the upper button for 2 seconds to turn on the device. The default mode is Free Jumping mode.
- Free Jumping Mode: Jump without time or repetition limit.
- Time Countdown Mode: Jump with a time limit. You can choose from 30 seconds, 1 minute, 5 minutes, 10 minutes, and customized time on the Skipjoy App. Without the app, the device will record the last selected period of time.
- Jump Countdown Mode: Set a limit of the number of jumps. You can choose from 50, 100, 500, 1000, and customized number of jumps on the Skipjoy App. Without the App, the device will record the last selected number of jumps.
- Consumed Calories Mode: When the jumping stops above 1.3 seconds, it will display the number of jumps and the jumping time. At the same time, short press the button to switch the screen, and the display will show the consumed calorie data.
The display in different modes can also be switched using the Skipjoy App. No mode can be switched during jumping. To install the other jump handle, follow the same instructions as shown above.
附加信息
- The product should not be used near a receiving antenna to avoid interference.
- Increase the separation between the product and receiver to improve reception.
- Connect the product to an outlet on a different circuit than the receiver if necessary.
- 如果需要，请咨询经销商或经验丰富的广播/电视技术人员以获得帮助。
- 未经责任方批准的更改或修改可能会导致用户操作设备的权限失效。
出生国家： 中国制造
使用跳绳前请仔细阅读说明。
产品规格
- 产品尺寸：
27×180mm / Rope size: 3000mm - 产品重量： 0.20 kg
- 液晶显示器： 28×16毫米
- 电源： 2 个 1.5V AAA
- Max. Jumps: 9999倍
- 最大限度。 时间： 99 分 59 秒
- Min. Jump: 1时间
- Min. Time: 1第二
- Auto off Time: 60秒
产品特点
- 液晶显示器
- 功能按键
- 蜂鸣器孔
- 电池仓
- PVC steel rope
- Rope accessories
产品液晶显示器
- BT icon indicates connected.
- Free Jumping mode: jump without time or repetition limit.
- Time countdown mode: jump with a time limit. You can choose from 30 seconds, 1 minute, 5 minutes, 10 minutes, and customized time on the Skipjoy App. Without the app, the device will record the last selected period of time.
- Jump countdown mode: set a limit of the number of jumps. You can choose from 50, 100, 500, 1000, and customized number of jumps on the Skipjoy App. Without the App, the device will record the last selected number of jumps.
- 跳跃次数
- 跳跃时间
- Calorie data
不同模式显示
自由跳跃模式
- Long press the upper
button for 2S to turn on the device. - The default mode is Free jumping mode.
时间倒计时模式
- Short press the upper button to switch to Time countdown mode.
- 短按
button to adjust the countdown time.
跳跃倒计时模式
- Short press the upper button to switch Jump countdown mode.
- 短按 button to adjust the countdown number of jumps.
不同模式下的显示也可以通过Skipjoy App进行切换。 跳跃过程中无法切换模式。
消耗卡路里模式
- 当跳跃停止超过1.3秒时，会显示跳跃次数和跳跃时间。 同时，短按 按钮切换屏幕，显示屏将显示消耗的卡路里数据。
跳绳的安装
跳绳和绳子分开包装在盒子里，请按照以下步骤安装绳子并相应调整长度。
重要提示： To avoid inaccurate, please make sure the longer rope is installed in the inside part of the handle.
- The installation of the other jump handle is the same as above showing.
- Please adjust the length of the jump rope to suit your height.
电池安装
请注意： Please pay attention to the correct installation direction of the battery positive and negative electrodes, otherwise the product cannot be used normally.
操作
- Before starting using the jump rope, please download the App: Skipjoy from App store or Google play. Or you can scan below QR code to download the App.
- When you install the App, please accept the permission requirement on Bluetooth, GPS & Location if your phone is operated under Android system;
备注
It is required by Google that all the smart phones operated with Android Ver. 6.0 or above must ask for the permission of location if any BLE device could be scanned and linked through Bluetooth. Any private information would not be collected by the App. You can also refer to the official document of Google for more information: https://source.android.com/devices/bluetooth/ble
- Open Skipjoy App, fill in your personal info, and start the App.
- Skipjoy会自动配对跳绳，您可以在App主界面查看连接状态。
- 主界面显示“已连接”表示配对成功。
- “Disconnected” shown on the main interface means unsuccessful pairing. In this condition, please press “Mine” _-> “Device” _-›”+” to add the device manually.
- 在App主界面点击你需要的模式开始你的跳跃；
跳跃模式
自由跳跃/时间倒计时跳跃/数字倒计时跳跃
- 按住按钮约 3 秒钟以切换您需要的模式。
- 您也可以从 App 中选择模式。
自由跳跃：
- 自由地跳绳，没有时间和跳跃次数的限制。
时间倒计时跳跃：
- set the total jumping time.
- options for time can be set on App: 30 sec, 1 min, 5 min, 10 min, and customized time;
- Without the App, the rope will use the last countdown setting of time from the App.
Numbers countdown Jumping
- 设置总跳跃；
- options for number of jumps can be set on App: 50, 100, 500, 1000 and customized number of jumps
离线存储功能
- 在没有运行App的情况下，你的跳跃数据会被绳索临时记录下来，重新连接后会与App同步。
重置绳索
- Press the button on the back of the LCD display for 8 seconds, the rope will be reset.
- The LCD will show all the signals for 2 seconds and then shut down. Press the button again to enter the normal use.
维护
注意和维护
- 请勿将绳索置于非常潮湿或炎热的环境中。
- 避免猛烈撞击或掉落绳索，否则可能会造成损坏。
- 小心对待绳索，因为它是一种电子仪器。
- 请勿将手柄浸入水中或在下雨时使用，因为它不防水，可能会损坏内置电子设备。
- 绳索仅用于体育锻炼目的。 请勿将其用于其他目的。
- Be careful when using the rope to avoid any injuries, and children under 10 are suggested to use the rope under the watch of parents
电池和充电
电池： The rope has a 2 x 1.5V AAA battery which could sustain normal use of about 25 days (calculated based on a daily use of 15 minutes, actual using time varies according to the environment and time of use). The typical stand-by time is 33 days (experimental data of the manufacturer under the temperature 25 °C and humidity 65%RH).
充值
- If the signal Lo shows on the screen, Please replace new AAA batteries.
Tips for Maintain
- 为了更好地延长电池的使用寿命，请勿将绳索长时间放置在没有电池的情况下。 建议在电量不足时给绳索充电。 长时间不使用绳索时，建议每月给绳索充电一次。
- 请勿打开手柄，以免绳索损坏。
- 请勿用电池焚烧手柄，以免电池爆炸。
- 绳索不应与生活垃圾一起处理。 请向当地政府咨询电池回收建议。
FCC声明
此设备符合FCC规则的第15部分。 操作必须符合以下两个条件：
- 此设备可能不会造成有害干扰。
- 本设备必须接受收到的任何干扰，包括可能导致意外操作的干扰。
出售
以环保的方式处理设备。- Dispose of it at a recycling center for used electrical and electronic.devices.
您可以从当地政府获得更多信息。
The packaging material is recyclablePlease dispose of it in an environmentally friendly manner and take it to a recycling center.
注意: 该设备经测试证明符合FCC规则第15部分中关于B类数字设备的限制。 这些限制旨在为住宅安装中的有害干扰提供合理的保护。 本设备会产生，使用并辐射射频能量，如果未按照说明进行安装和使用，可能会对无线电通信造成有害干扰。 但是，不能保证在特定安装中不会发生干扰。 如果此设备确实对无线电或电视接收造成有害干扰（可以通过打开和关闭设备来确定），则鼓励用户尝试通过以下一种或多种措施来消除干扰：
- 重新调整或摆放接收天线。
- 增加设备和接收器之间的距离。
- 将设备连接到与接收器不同电路的插座上。
- 请咨询经销商或有经验的无线电/电视技术人员以寻求帮助。
未经负责合规方明确批准的更改或修改可能会使用户丧失操作设备的权限。
中国制造
文件/资源
 |
Welland RS2360B 智能跳绳 [pdf] 用户手册 RS2360B, 2AP3Q-RS2360B, 2AP3QRS2360B, RS2360B 智能跳绳, 智能跳绳, 跳绳, 绳子 |
