Bryton CR2032 智能踏频传感器用户手册
警告
Always consult your physican before you begin any training
Remove battery tab before use
The Sensor contains a user-replaceable CR2032 battery.
使用正确尺寸的螺丝刀以防止螺丝滑落。
Max 1.0 kgf.cm
0.1 牛米
磷酸氢钙
- 根据当地法规取出并立即回收或处理废旧电池，并将其放在远离儿童的地方。 不要 将电池丢弃在家庭垃圾中或焚烧。
- 即使是使用过的电池也可能会导致严重伤害甚至死亡。
- 请致电当地毒物控制中心获取治疗信息。
- Battery type:CR2032; Battery voltage：3VDC。
- 非充电电池不可充电。
- 请勿强行放电、充电、拆卸、加热至高于（制造商指定的温度等级）或焚烧。 这样做可能会因排气、泄漏或爆炸而导致化学灼伤，从而造成伤害。
- 确保电池按照极性（+ 和 -）正确安装。
- 请勿混用新旧电池、不同品牌或类型的电池，例如碱性电池、碳锌电池或可充电电池。
- 根据当地法规，取出长期未使用的设备中的电池并立即回收或处置。
- 务必完全盖紧电池仓。如果电池仓无法完全关闭，请停止使用本产品，取出电池，然后 请将本品放在儿童接触不到的地方。
Installing Bryton Smart Sensors
Pairing Bryton Smart Sensors
Pairing Bryton Smart Sensors with your ANT+ / BLE Devices
After installing Bryton Smart Sensors, rotate the crank and wheel a few times to wake the sensors up. The sensors can only be paired when they are awake; if left inactive, they will go back to sleep to save power.
笔记：
Once the sensors are awakened, the LED will blink twice. The LED continues to blink as long as you keep pedaling to initiate pairing. After approximately 15 blinks, it will stop. If the sensor is not used for 10 minutes, it will enter sleep mode to conserve power. Please complete the pairing while the sensor is still awake.
兼容：
Whole range of Bryton GPS bike computers, training apps or devices displayed by using Bluetooth® Low Energy technology & ANT+® connectivity.
For iOS and Android compatibility:
Please make sure your smartphone allows Third Party App access to the Bluetooth 4.0 (Smart) Radio.
Connecting to your ANT+/BLE Devices
After pairing, Bryton devices will automatically connect to Bryton Smart Sensors whenever the sensors are active.
笔记:
- The pairing steps differ with each Bryton device. Please refer to individual user manuals.
- 配对时请远离其他 ANT+ 或 BLE 传感器。
规格
| 节奏 | 速度 | |
| Physical Size | 36.9 x 31.5 x 8.5 毫米 | 36.9 x 34.8 x 8.5 毫米 |
| 重量 | 9 克 | 9 克 |
| 电池寿命 | Up to 1 year | |
| 工作温度 | -10 °C ~ 60 °C | |
| Water Resistance | Incidental exposure to water of up to 1 meter for up to 30
分钟 |
|
| 传输范围 | 3 米 | |
| Radio Frequency / Protocol | 2.4GHZ/Bluetooth 4.0 and ANT+ 2.4GHz band 0dBm | |
文件/资源
 |
Bryton CR2032 Smart Cadence Speed Sensor [pdf] 用户手册 CR2032 Smart Cadence Speed Sensor, CR2032, Smart Cadence Speed Sensor, Speed Sensor, Sensor |