CGSULIT TS02 蓝牙 TPMS 传感器
Exploded Diagram of TPMS Sensor Assembly
技术规格
| 电池寿命 | 5 年以上 |
| 工作温度 | -40°C 至 +105°C |
| 存储温度 | -40°C 至 +105°C |
| 温度测量范围 | -40°C 至 +105°C |
| 电源 | 3V |
| 工作湿度 | ≤90% |
| 工作频率 | 2402-2480MHz |
| 压力测量范围 | 0–800 千帕 |
| 压力测量精度 | ±10千帕 |
| 温度测量精度 | ±3℃ |
| Acceleration Support | ±250 克 |
| 传输功率 | 4–6 dBm |
| 电池容量 | 345 毫安时 |
| 防护等级 | IP67 |
| 包装尺寸（长×宽×高） | 73 × 30 × 45 毫米 |
| 包装重量 | 44.1 克 |
包装清单
| 物品 | 数量 |
| 成品包装盒 | 1 |
| 蓝牙轮胎压力传感器单元 | 1 |
| Black/Coffee-Colored Aluminum Valve Stem | 1 |
| 拧紧 | 1 |
操作介绍
- Deflate the tire Remove the valve cap and valve core, then fully deflate the tire. Use an air-powered bead breaker to separate the outer tire bead from the rim.
Note: Ensure that the valve stem is positioned 180° opposite the bead breaker blade.
- Remove the tire Secure the tire on the tire changer. Position the valve stem at the 1 o’clock position relative to the tire changer’s mount/demount head. Insert the tire lever and lift the tire bead over the mount head to remove the bead.
Note: Maintain this starting position throughout the demounting process.
- Remove the sensor Use a screwdriver to loosen the retaining screw on the valve stem to detach the sensor. Then loosen the retaining nut and remove the valve stem.
- Install the sensor and valve stem
- Step 1: Insert the valve stem through the valve hole from the inside of the rim.
- Step 2: Using a holding tool, tighten the nut to 4.0 N-m (Newton-meters) torque.
- Step 3: Adjust the installation angle so the sensor sits flush against the rim, then tighten the retaining screw.
- Step 4: The sensor and valve stem are now installed.
- Install the tire Place the tire onto the rim, ensuring that the valve stem is positioned 180° opposite the mount head. Mount the tire onto the rim following the tire changer manufacturer’s instructions.
配对和连接
- 启动车辆
Once the vehicle is started, it will automatically search for the installed Bluetooth Tire Pressure Monitoring Sensors (TPMS). - 自动连接
When the vehicle speed reaches 24 kph or above and is maintained for 1-3 minutes, the in-vehicle system will automatically detect the sensors and synchronize the data. When the tire pressure and temperature for all four wheels are displayed on the “Vehicle Status” or “Tire Information” screen, the connection is successful. If the connection fails, restart the vehicle or check the sensor installation and battery level.
笔记
Before installing the sensor, please read all instructions and precautions carefully. It is recommended that the installation be performed by a professional. Failure to follow the installation instructions may result in the tire pressure sensor not functioning properly.
- Web地点： www.cgsulit.com
- 电子邮件： support@cgsulit.com
FCC警告
本设备符合 FCC 规则第 15 部分的规定。操作需遵守以下两个条件：
- 本设备不得造成有害干扰，并且
- 本设备必须承受任何收到的干扰，包括可能导致不良操作的干扰。
任何未经合规负责方明确批准的更改或修改都可能使用户操作该设备的权限失效。
笔记： 本设备已经过测试，符合 FCC 规则第 15 部分对 B 类数字设备的限制。这些限制旨在为住宅安装提供合理的保护，防止有害干扰。本设备会产生、使用并能辐射射频能量，如果不按照说明进行安装和使用，可能会对无线电通信造成有害干扰。但是，无法保证在特定安装中不会发生干扰。如果本设备确实对无线电或电视接收造成有害干扰（可通过关闭和打开设备来确定），建议用户尝试通过以下一种或多种措施来纠正干扰：
- 重新调整或重新定位接收天线。
- 增加设备与接收器之间的距离。
- 将设备连接到与接收器不同电路的插座上。
- 请咨询经销商或经验丰富的无线电/电视技术人员寻求帮助。
本设备符合 FCC 针对不受控环境所规定的辐射暴露限制。本设备的安装和操作应使辐射器和身体之间的距离至少保持 20 厘米。
常问问题
What should I do if the connection fails during pairing?
: If the connection fails, try restarting the vehicle or checking the sensor installation and battery level. Ensure that the vehicle speed reaches the required threshold for automatic connection.
我可以自己安装传感器吗？
It is recommended to have the sensor installed by a professional to avoid any issues with functionality. Follow all provided instructions carefully.
文件/资源
 |
CGSULIT TS02 蓝牙 TPMS 传感器 [pdf] 使用说明书 TS02，TS02蓝牙TPMS传感器，蓝牙TPMS传感器，TPMS传感器，传感器 |