EDA Technology ED-MONITOR-070C 工业自动化和控制用户手册

内容隐藏

1 EDA 技术 ED-MONITOR-070C 工业自动化与控制

2 硬件手册

EDA 技术 ED-MONITOR-070C 工业自动化与控制

硬件手册

本章介绍了该产品view, packaging list, appearance, buttons, indicators, and interfaces.

超过view
The ED-MONITOR-070C is a 7-inch industrial touch monitor featuring a screen resolution of 1024×600, a high brightness of 425 cd/m², and a multi-touch capacitive touch screen. It includes one standard HDMI interface, one Type-C USB port, one DC Jack power interface, and one 3.5mm audio jack, making it compatible with various general-purpose PC hosts. The backlight can be adjusted via buttons, and it is primarily used in industrial control applications.

HDMI 接口允许直接连接到 PC 主机的 HDMI 输出。

Type-C USB接口传输触摸屏信号。
3.5 毫米音频插孔支持耳机连接。
DC Jack电源接口支持12V~24V直流输入。

包装清单

1 x ED-MONITOR-070C Monitor

Appearancel
本节介绍各个面板接口的功能和定义。

前面板
介绍前面板接口的类型及定义。

不。	描述
1	1×LCD屏幕，7英寸触摸屏，分辨率为1024×600，多点触控电容式触摸屏。

后面板
介绍后面板接口的类型及定义。

不。	描述
1	4 个按扣安装孔，用于将按扣固定到设备上进行安装。
2	4 x VESA 安装孔，保留用于 VESA 支架安装。

侧面板
介绍侧面板接口的类型及定义。

不。	描述
1	1 × 3.5mm stereo audio output jack, supports headphone connectivity.
2	1 × red power indicator, using to view 设备的开机和关机状态。
3	1 × DC input, DC Jack connector, which supports 12V~24V DC input.
4	1 × HDMI input, Type-A connector, which connects to the HDMI output of a PC host.

不。	描述
5	1 × USB touch screen port, Type-C USB connector, which connects to the USB port of a PC host to transmit touch screen signals.
6	1 × Rubber plug (pre-drilled 7mm diameter circular cable routing hole), designed to accommodate additional cable management needs.
7	1 × “Brightness –” button, press the button to decrease the backlight brightness of the LCD screen.
8	1 × “Brightness +” button, press the button to increase the backlight brightness of the LCD screen.

按钮
The ED-MONITOR-070C device includes two backlight brightness adjustment buttons. The buttons are black in color and marked with screen-printed labels 在房屋上。

按钮	描述
	Press the button to increase the backlight brightness of the LCD screen.
	Press the button to decrease the backlight brightness of the LCD screen.

指标
The ED-MONITOR-070C device includes a red power indicator, marked with the screen-printed label “PWR” on the housing.

指标	地位	描述
PWR	On	设备已上电。
	眨	设备电源异常，请立即停止电源。
	离开	设备未开机。

界面
介绍ED-MONITOR-070C中各个接口的定义及功能。

电源接口
ED-MONITOR-070C 设备包含 1 个电源输入端口，带有直流插孔连接器，外壳上标有“24V DC”。它支持 12V~24V 直流输入。

提示
建议使用 12V 2A 电源适配器。

HDMI接口
The ED-MONITOR-070C device includes 1 HDMI input interface with a Type-A connector, labeled “HDMI INPUT” on the housing, used to connect to the HDMI output of a PC host.
Type-C USB接口
The ED-MONITOR-070C device includes 1 Type-C USB interface, labeled “USB TOUCH” on the housing. This interface connects to the USB port of a PC host to transmit touch screen signals.

音频接口
The ED-MONITOR-070C device includes 1 audio interface (3.5mm 4-pole headphone jack), labeled “AUDIO” on the housing, supporting stereo audio output.

安装设备

The ED-MONITOR-070C device supports front embedded installation. The standard packaging does not include the embedded installation Mounting kit (ED-ACCHMI-Front). Please purchase the ED-ACCHMI-Front kit in advance.

准备：
已获得ED-ACCHMI-Front Mounting套件（包括4×M4*10螺丝、4×M4*16螺丝、4个按扣）。
十字螺丝刀已经准备好了。

步骤：

根据ED-MONITOR-070C的尺寸确定机柜上的开孔尺寸，如下图所示。

根据步骤1定义的孔径尺寸在机柜上钻孔。
将 ED-MONITOR-070C 从外侧嵌入机柜。

将卡扣的螺丝孔（无螺纹）与设备侧的卡扣安装孔对齐。
将按扣固定到设备上。
使用 4 颗 M4*10 螺钉将卡扣固定到设备上，方法是将其穿过非螺纹孔并顺时针拧紧。
然后，使用 4 个 M4*16 螺钉将卡扣固定到柜体上：将它们穿过卡扣的螺纹孔，按压柜体内侧，然后顺时针旋转直至完全拧紧。

使用设备

The ED-MONITOR-070C requires a PC host for operation and does not require driver installation. Connect it to the HDMI output of a PC host first, then power on the device to enable normal display. It supports backlight adjustment via dedicated buttons and software.

连接电缆
本节介绍如何连接电缆。

准备：

已获得功能正常的电源适配器。
已获得功能齐全的PC主机。
已获得功能性 HDMI 和 USB 电缆（Type-A 至 Type-C USB 电缆）。

连接电缆示意图：
各接口引脚定义及接线方法请参考1.6 接口。

提示
ED-MONITOR-070C 的 HDMI INPUT 接口兼容各种 PC 主机。下图以 Raspberry Pi 为例，演示了连接线。amp勒。

启动设备
ED-MONITOR-070C 没有物理电源开关。连接电源后，设备将自动开机。启动完成后，设备将显示所连接 PC 主机的桌面。

调节背光亮度
ED-MONITOR-070C supports brightness adjustment via physical buttons and software.Button-Based Brightness Adjustment
Once the ED-MONITOR-070C is connected to a PC and displays normally, its backlight brightness can be adjusted using the two dedicated brightness adjustment buttons on the side panel.

按钮	描述
	Press the button to increase the backlight brightness of the LCD screen.
	Press the button to decrease the backlight brightness of the LCD screen.

Software-Based Brightness Adjustment
After connecting the ED-MONITOR-070C to a PC host and ensuring normal display operation, the screen backlight can be adjusted via software. Note that the operation methods differ between the Desktop and Lite versions of the operating system.

Raspberry Pi OS（桌面版）
Adjusting backlight brightness via UI on Raspberry Pi OS (Desktop).

准备：

ED-MONITOR-070C is properly connected to the Raspberry Pi host with normal display output. • The Raspberry Pi host has stable network connectivity.

步骤：