Elitech LogEt 6 温度数据记录器
安全说明和注意事项
安全说明
为了确保您正确安装和使用本产品，请您阅读并严格遵守以下条款：
电池
- Please use original or technically compatible batteries. Do not use batteries that do not meet product specifications to prevent damage to equipment or other malfunctions.
- 请勿私自拆解、挤压、撞击或加热电池，请勿将电池投入火中，否则可能导致电池爆炸和起火
外接电源：
- When external power supply is required, please use the power adapter configured for this device.
- Do not use other power adapters that do not meet the external connection technical specifications, otherwise it may damage the instrument and equipment, and even cause a fire power supply.
设备
- In flammable and explosive gas environments, please use this equipment in accordance with compliance requirements; otherwise, it may cause explosions and fires
- 设备在使用过程中，如果设备发出烧焦或其他气味，应立即切断电源并及时联系制造商或供应商
注意力
- 如果设备长期不使用，应将其取出并存放在包装盒中，置于干燥阴凉的环境中
- 用户不得对此设备进行任何未经授权的更改。任何未经授权的更改都可能影响设备的准确性，甚至损坏设备。
- 请勿在恶劣环境下使用设备，以免因雨水、雷电等恶劣天气造成仪器短路、烧毁等故障
- When the recorder is offline (no data upload), please confirm the networking status of the device
- 请在记录仪的测量范围内使用
- Please mistakenly place the external probe directly in a liquid environment to avoid equipment damage
- 请勿用力撞击本录音机
- 记录仪的测量值可能受以下因素影响
温度误差
Placed in the measurement environment for too short a stable time Close to heat sources, cold sources, or directly in a water soaked state
湿度误差
- 置于测量环境中稳定时间过短
- 长期暴露于蒸汽、水雾、水幕或冷凝环境中
污染：
- 处于多尘或其他污染的环境中
产品结束view 和外观
LogEt 6 is a disposable dry ice recorder with a built-in probe. Equipped with ultra-low temperature sensors as standard, the entire machine can directly record temperature in an environment of -85 ° C. It can export reports or automatically generate PDF files through data center software, with 16000 sets of storage, 30 days of battery life, 2 years of shelf life, and support for shadow data function before and after. Widely used in freezers, medical insulation boxes, laboratories, and other scenarios.
- USB 接口
- 引领
- LCD 屏幕
- 停止按钮
- 开始按钮
- External probe interface (reserved)
- 电池座
- max/min/avr/MTK/log quantity
- 上限
- 下限
- 工作状态
- 电池电量
- Temperature/humidity values
- 日期
- 时间
Model list and specifications
模型列表
| 模型 | 对数 6 |
| 配置 | PT |
| probe Type | Built in ultra-low temperature (dry ice) |
| Main sensor parameters | 温度传感器 |
| 温度测量范围 | -85℃～50℃ |
| 测温精度 | ±0.5℃（-20℃~40℃）；±1℃（other） |
| 温度分辨率 | 0.1℃ |
规格
| 存储容量 | 16000 |
| 数据接口 | USB 接口 |
| 电池 | LS14250 lithium battery |
| 保质期 | 2年 |
| 电池寿命 | 30Days（log interval5min） |
| Communication module/mode | USB 接口 |
| 防护等级 | IP65 |
| Product dimensions (height*length*width) | 100*46*19毫米 |
| 重量 | 60克 |
| 工作环境 | -85˚C～50˚C |
| 物理按钮 | 开始/停止 |
| 报警方式 | 引领 |
| Adaptation software | Elitechlog |
操作说明
主要功能
Start button: In normal display mode, press the start button to display the current temperature, and continue pressing to switch temperature data, date and time, number of records, maximum value, and minimum value; Press and hold for 5 seconds to start recording; Stop button: Long press for 5 seconds to stop recording;
Legend status indication
软件操作
下载软件
Download and install the “Jingchuang Data Center” software www.e-elitech.com/xiazaizhongxin (China), www.elitechlog.com/software (other countries)
读取数据
- Connect the computer using a USB interface
- Open the “Jingchuang Data Center” and wait for the link to complete.
- Open the PDF file directly on my computer or open the summary/historical data of “Jingchuang Data Center” to view 數據。
笔记
Data can be directly read without the need for the “Jingchuang Data Center” software After the device is taken out of a low-temperature environment, it needs to be left to stand for a period of time and wait for it to return to room temperature before the LCD screen displays data
导出数据
Click on Summary/Historical Data, select Export Data, and choose the format to export
配件列表
- Host * 1, instruction manual (electronic version), calibration certificate (electronic version)
保修和售后服务
产品质保：1年
本产品自购买之日起7日内，因性能故障，可退换货或维修。保修期为自购买之日起一年（以有效购货凭证为准）。保修期内，在正常使用情况下，因产品质量问题导致的任何故障，均可免费维修。维修产品的运费由寄件人单方面承担。
If any of the following situations are met, it is not within the scope of the after-sales guarantee:
- Damage caused by force majeure, such as earthquakes, fires, floods, typhoons, etc;
- Damage caused by human factors, such as improper use, maintenance, and storage by consumers.
- Damage caused by maintenance, disassembly, etc. by non-precision service personnel or authorized service providers;
- 超出保修期限和范围；
- 产品（如外壳、电缆等）的自然磨损、消耗、老化。
常见问题解答
问：设备发出异味怎么办？
A: Immediately disconnect the power supply and contact the manufacturer or supplier for assistance.
问：如何开始在设备上录音？
A: Press and hold the Start button for 5 seconds to initiate recording.
文件/资源
 |
Elitech LogEt 6 温度数据记录器 [pdf] 使用说明书 01、02、LogEt 6 温度数据记录器、LogEt 6、温度数据记录器、数据记录器、记录器 |