传统 DSP Wavelaunch 处理器
产品使用说明
- The high definition Digital Wavelaunch Processor hosts a LEGACY custom algorithm that automatically loads when the processor is powered on.
- Factory settings are ‘plug and play’ and do not require a computer to utilize. Connections between the preamp， 力量 amp您可以在扬声器/低音炮中找到升音器和扬声器/低音炮。
- Attach the included IEC power cable to the rear of the unit, and flip the rear power switch by pushing. The front panel will load and display the name of the currently selected algorithm next to Scene.
- It is okay to leave the Wavelaunch processor on 24/7 as it draws minimal power.
- 数据轮可左右旋转，以增加/减少屏幕上闪烁参数的数值。按下数据轮将输入该数值并将光标移动到下一个参数。
- Wavelaunch provides parametric EQ options to further adjust Legacy speakers/subwoofers. Here’s how to adjust the EQ of the left Aeris XD speaker:
- Press the PEQ button located on the left of the front panel.
- Note the input channels A-D, with A corresponding to the left signal and B to the right signal from your preamplifier/surround processor.
- 按下输入 A 按钮。
- Rotate the rotary dial left/right to the desired setting. Press the dial in to progress to the next setting.
- Repeat steps for input B if applying adjustments to the right Aeris XD speaker.
- Press the data wheel again to exit once adjustments are done.
快速设置
- The high definition Digital Wavelaunch Processor hosts a LEGACY custom algorithm that automatically loads when the processor is powered on.
- Factory settings are ‘plug and play’, and do not require a computer to utilize.
- Connections between the preamp， 力量 amp您可以在扬声器/低音炮中找到升音器和扬声器/低音炮。
开机
- Attach the included IEC power cable to the rear of the unit, and flip the rear power switch by pushing I.
- The front panel will load and display the name of the currently selected algorithm next to “Scene”.
- 可以让 Wavelaunch 处理器全天候运行，因为它消耗的电量最少。
增大/减小传统音频扬声器/低音炮的音量
数据轮可左右旋转，以增加/减少屏幕上闪烁参数的数值。按下数据轮将输入该数值并将光标移动到下一个参数。
让我们使用 Legacy Aeris XD 来演示一下ample，假设您想增加 Aeris 低音部分的音量（增益）。
- Press the “Gain” button located at the left of the front panel.
- Please note the 8 output channels at the far right of the front panel, labeled 1-8. Output channel 1 corresponds to the left Aeris active bass channel, and output channel 5 corresponds to the right Aeris active bass channel. Output 2 corresponds to the left Aeris upper section, and Output 6 corresponds to the right Aeris upper section, powered by your stereo amp扩音器。
- Press the output “1” button.
- The screen will update, and you will see a dB gain level- please rotate the rotary dial to the right to increase the volume level of the left bass section. Once the desired bass output on the left side is achieved, you can press the output “5” button and increase the volume level of the right bass section to the desired level.
- Once you are done with adjustments, you can press the data wheel again to exit.
进行 EQ 调整
Wavelaunch provides the user with parametric EQ options to further adjust your Legacy speakers/subwoofers.
让我们使用 Legacy Aeris XD 来演示一下ample. 以下是如何调整左侧 Aeris XD 扬声器的 EQ。
- Press the “PEQ” button located at the left of the front panel.
- Please note the 4 input channels at the right of the front panel, labeled A-D. Input channel A corresponds to the left signal, and channel B corresponds to the right signal from your preamplifier/surround processor.
- Press the input “A” button.
- The screen will update and you can rotate the rotary dial left/right to the desired setting. You can press the dial in to progress to the next setting.
- Repeat these steps for input “B” if you would like to apply the same PEQ adjustments to the right Aeris XD speaker.
- Once you are done with adjustments, you can press the data wheel again to exit.
連接
- A connection assignment printout is also included with your speaker/subwoofer to assist you in getting started.
Wavelaunch Processor Inputs
- Labeled A, B, C, D
- Typical speaker Assignments are A left signal, B right signal
- Please consult your speakers/subwoofers diagram for specific connections.
Wavelaunch Processor Outputs
- Labeled, 1, 2, 3, 4, 5, 6, 7, 8
- Typical speaker assignments are outputs 1-4 left signal, and outputs 5-8 right signal.
- 例如ample, Aeris XD assignments Output channel 1 corresponds to the left Aeris active bass channel, and output channel 5 corresponds to the right Aeris active bass channel. Output 2 corresponds to the left Aeris upper section and Output 6 corresponds to the right Aeris upper section, powered by your stereo amp扩音器。
Wavelaunch 配件
- Inside the Wavelaunch processor carton packaging, you’ll find the included IEC power cable.
规格
- Processor (DSP): 32-Bit Floating Point
- Analog Converters: Super Performance 24-bit
- 程序数：64
- Parametric EQ: 16 per channel
- Filters: Butterworth, Linkwitz-Riley & Bessel
- Connectors: 4 XLR In, 8 XLR Out, USB Type B
- Dynamic Range: 115 dB (unweighted)
- Distortion: ≤0.0025% @ 4dBu 20Hz-20KHz
- Frequency Response (Hz, +/- .1 dB): 20 to 20 kHz
- 尺寸（高x宽x深，英寸）：2.6 x 19 x 10.6
- 重量：7磅
- Samp频率：96 kHz
保修单
Legacy Audio supports its customers and products with pride. We cheerfully warrant our processors from defects in materials and workmanship for three (3) years. Please register your product with Legacy Audio. Should you require service, Legacy will require proof of purchase to honor the warranty, so please keep your receipt.
- 保修适用于原始所有者且不可转让。
- 保修适用于从“授权传统经销商”购买的产品。
- 有源组件（例如数字处理器或内部组件）的保修 amplifiers 仅限于三 (3) 年的保修期。
- 经销商库存的保修期最长为从发票开始算起的两年。
- 保修不包括产品往返于客户、分销商或经销商的运输费用，或相关的运输损坏。
- Legacy Audio 保修不涵盖以下情况或条件：
- Accidental damage, electrical abuse or associated equipment failure
- Use is inconsistent with the recommended operating instructions and specifications
- 因改装或未经授权的服务造成的损坏
- 与移除和重新安装有缺陷产品相关的成本。 对其他产品的间接损坏。
- Normal wear, such as fading of finishes due to sunlight.
关心
- If you wish to clean your Wavelaunch, use a diluted ammonia-based window cleaner.
- Do not use any abrasive cleaners or chemical solvents.
Do not block any ventilation openings. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus that produce heat. The power cable should be unplugged from the outlet during severe electrical storms or when unused for a long time. Grounding: Adequate precautions should be taken so that the grounding provisions built into an electrical product are never defeated.
All information contained in this manual is accurate to the best of our knowledge at the time of publication. In keeping with our policy of ongoing product improvement, we reserve the right to make changes to the design and features of our products without prior notice. A listing of Legacy Audio Dealers and Distributors can be found on the Legacy Audio web地点 www.legacyaudio.com or by contacting Legacy Audio at: 3023 E. Sangamon Ave., Springfield, IL 62702, USA—Phone: +1 217-544-3178.
接触
- ©2025 传统音频
- 3023 E Sangamon Ave。
- 伊利诺伊州斯普林菲尔德 62702
- 电话： 800-283-4644
- 传真： 217-544-1483
常问问题
- What are the differences between the included Legacy Wavelaunch processor and the upgraded Legacy Wavelet 2 processor?
- There are quite a few technical differences between the two. The Wavelet 2 processes at 64 bits and has a more advanced correction algorithm. Most importantly, the Wavelet 2 also corrects in the time domain, while the
- Wavelaunch is largely correcting only in the frequency domain.
- Additionally, Wavelet 2 can also be used as a preamp生命体（前amp can be bypassed), and includes its own microphone to automatically run room correction and adjust for the room. Wavelet 2 also features a high-end DAC, capable of up to 32 bit 384kHz audio, in addition to accommodating 4 other analog stereo sources and 4 digital inputs.
- Finally, Wavelet 2 is also easier to control, wirelessly from any iPad/iPhone/Android or computer.
- For full information, please see more here.
文件/资源
 |
传统 DSP Wavelaunch 处理器 [pdf] 用户手册 2025, DSP Wavelaunch 处理器, DSP, Wavelaunch 处理器, 处理器 |