zigbee QS-S10 Tuya WiFi Smart Curtain Switch Module
This Zigbee Curtain Module is designed to automate the opening and closing of curtains or blinds. It allows for remote control and scheduling of curtain operations, providing convenience and energy efficiency.
技术规格
- Product type: Zigbee Curtain Module
- 卷tage：AC100-240V 50/60Hz
- 最大负载：3A
- Operation frequency: 2.405GHz-2.480GHz
- Operation temp.: -10°C to +40°C
- Protocol: IEEE802.15.4 Zigbee 3.0
- Operation range: Zigbee network coverage
- Dimensions (WxDxH): Specific dimensions
- IP等级：未指定
- 保修：包括制造商保修
尺寸
安装
- Installation must be carried out by a qualified electrician in with læal regulations.
- 请将设备放置在儿童接触不到的地方。
- 使设备远离水，damp 或炎热的环境。
- Install the deviæ away from strong signal souræs such as microwave oven that may cause signal interruption resulted to abnormal operation of the device.
- 混凝土墙或金属材料的阻碍可能会降低设备的有效工作范围，应避免。
- Do NOT attempt to disassemble,repair or the device.
带安装夹
接线说明和图表
- 在进行任何电气安装工作之前，请关闭电源。
- 根据接线图连接电线。
- 将模块插入接线盒。
- Turn on the power supply and follow switch modul e con guration instructions.
Global international operation. Whenever & Wherever You are, All—in—one Mobile App
内部本地运营 
手动超控
The Curtain module terminal reserves the access of manual override function fort he end-user to switch on/ off.
If you have connected the wall push-button, check its work. Single pressing ofthe “down” button / “up” button, will cause that the roller shutters moves in the desired direction to the end position. If the ele-ctric shutter goes in the opposite direction to the expected,select “motor reversal” in the “More”op-tion. When the electric shutter is moving up, press-ing “up” button switches causes that the shutter will stop immediately; when the electric shutter is moving down, pressing “down” button switches causes that the shutter will stop immediately.
笔记
- Both the adjustment on App and Curtani can overwrite each other; the last adjustment remains in memory.
- App控制与手动开关同步。
- 传统开关选择按钮类型。
IOS APP / 安卓APP
扫描二维码下载涂鸦智能App，也可以在App Store或Googleplay搜索关键词“涂鸦智能”下载App。
Log in or register your account with your mobile number or e-mail address.Type in the verificationcode sent to your mobile or mail box, then set your login password. Click “Create Family” to enter into the APP.
在App上打开ZigBee网关的控制面板
在进行重置操作之前，请确保Zigbee网关已添加并安装到WIFI网络中。确保产品在 Zigbee 网关网络范围内。
开关模块接线完成后，长按复位键或者传统开关约10秒，直到模块内部指示灯快速闪烁表示配对成功。
Click “+” (Add sub—device) to select the suitable product gateway and follow the on—screen instruction for paring.
连接将需要大约 10-120 秒才能完成，具体取决于您的网络状况。
配对完成后，Zigbee 窗帘将显示在 App 上。
连接到 amazon alexa 或 Google Assistant 进行语音控制，或与家人或朋友共享设备。
系统要求
WIFE Router ZigBee gateway iPhone, iPad (iOS 7.0 or higher) Android 4.0 or higher
常见问题解答
无法配置交换模块怎么办？
一种。 请检查设备是否开机。
b. 确保 Zigbee 网关可用。
c. Ensure the internet connection is stable.
d. Verify that the password entered in the App is correct.
e. Confirm the wiring is correct.
这个 Zigbee 开关模块可以连接什么设备？
您的大多数家用电器，例如lamps, washing machines, coffee makers, etc., can be connected to this Zigbee switch module.
如果 Wi-Fi 关闭会发生什么？
You can still control the device connected to the switch module using your traditional switch. Once the Wi-Fi connection is restored, the device will automatically reconnect to your network.
如果我更改了 Wi-Fi 网络或密码该怎么办？
You need to re-connect the Zigbee switch module to the new Wi-Fi network through the App according to the user guide.
如何重置设备？
1. Power on/off the device five times until the indicator light flashes.
2. Switch on/off the traditional switch five times until the indicator light flashes.
3. Press and hold the reset key for about 10 seconds until the indicator light flashes.
文件/资源
 |
zigbee QS-S10 Tuya WiFi Zigbee Smart Curtain Switch Module [pdf] 使用说明书 QS-WIFI-Zigbee-C04, QS-S10, QS-S10 Tuya WiFi Zigbee Smart Curtain Switch Module, QS-S10, Tuya WiFi Zigbee Smart Curtain Switch Module, Zigbee Smart Curtain Switch Module, Smart Curtain Switch Module, Curtain Switch Module, Switch Module |